We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Beam Sensor.
ipros is IPROS GMS IPROS One of the largest technical database sites in Japan that collects information on.

Beam Sensor - List of Manufacturers, Suppliers, Companies and Products

Beam Sensor Product List

1~12 item / All 12 items

Displayed results

Infrared Beam Switch Opposing Type Standard Specification for 6m DS-6N

It can be easily installed with a super compact controller and a detachable connection cable.

■Realization of compact controller This is a small controller with dimensions of W: 45mm H: 94mm D: 29mm, making it easy to install inside the door engine. ■Connection cables can be freely cut Depending on the installation conditions, both the light-emitting and light-receiving parts can have their connection cables freely cut. ●Cable length: 5m (for 6m DS-6N series, for 4m DS-4RN series) ●Cable length: 10m (for 10m DS-10N series) ■Slim sensor head can be installed with one touch The sensor head adopts a one-touch installation type that can be installed simply by pushing it into a pre-drilled hole (Φ12mm). Additionally, the diameter of the ring cover has been increased from the conventional 12mm to 15mm, improving workability. ■Built-in sensitivity volume It has a built-in sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance. ■User-friendly design ●High-reliability design that is hardly affected by external light disturbances such as sunlight ●Convenient operation indicator light for operation confirmation (Green LED: always on, turns off during detection)

  • Safety Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Improvement Idea] Safety measures for parking lot exit with a parking sensor system!

A parking sensor system that utilizes directional detection features for safety measures when vehicles exit the parking lot! It alerts with light and sound.

【Customer's Issue】 We want to implement safety measures for vehicles exiting the parking lot. 【Proposed Solution】 Install a combination of beam sensors and alarms at the vehicle entrance and exit. This will alert the surroundings with light and sound. ↓↓↓ Official Online Shop PATLITE SHOP Listing Page ↓↓↓ https://online-shop.patlite.co.jp/c/problem/problem_0066

  • Other FA equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Recommended dual beam sensor for CO2 sensor method.

Differences in sensors you should know to avoid "failure" with inexpensive overseas products.

Please download and refer to the document "What is a Dual Beam Sensor CO2 Sensor" for reference materials. There are two types of CO2 sensors: dual beam sensors and single beam sensors. This document outlines the differences in specifications for each type. We recommend checking this before making a purchase.

  • Other measurement, recording and measuring instruments
  • Ventilation and Exhaust
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Infrared Beam Switch Standard Specification for 6m DS-6TN

The controller unit has been miniaturized, and the wires can be freely cut. By adopting a scanning method, mutual interference between the upper and lower tiers is prevented.

■Realization of compact controller Achieved miniaturization of the controller with dimensions W: 45mm H: 120mm D: 29mm. It does not require a specific installation location within the door engine. ■Connection cables can be freely cut Depending on the installation conditions, both the light-emitting and light-receiving sections can have their connection cables freely cut, eliminating the need to bundle them inside the door engine. ■Can also be used as a single beam It can be used as a single beam initially, and if needed, it can be upgraded to a double beam by adding a sensor head. ■Adoption of scanning method The adoption of a scanning method eliminates mutual interference between the upper and lower sections. Therefore, there is no need to interchange the light emitters and receivers of the upper and lower sections during installation. ■Built-in sensitivity volume It has a built-in sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance. ■Thin sensor head can be installed with one touch The sensor head section adopts a one-touch installation type that can be installed simply by drilling a hole (Φ12mm) and pushing it in. Additionally, the diameter of the ring cover has been increased from the conventional 12mm to 15mm, improving workability.

  • Safety Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Infrared Beam Switch Standard Specification for 4m DS-4RTN

The controller section has been miniaturized, and the wires can be freely cut. By adopting a scanning method, mutual interference between the upper and lower sections is prevented.

■Realization of compact controller Achieved a compact controller with dimensions W: 45mm H: 120mm D: 29mm. It does not restrict installation locations even within the door engine. ■Connection cables can be freely cut Depending on the installation conditions, both the light-emitting and light-receiving parts can have their connection cables freely cut, eliminating the need to bundle them inside the door engine as before. ■Can be used as a single beam It can also be used as a single beam, allowing for initial installation as a single beam and the option to use it as a double beam by adding a sensor head if needed. ■Adoption of scanning method The adoption of a scanning method eliminates mutual interference between the upper and lower sections. Therefore, there is no need to interchange the light emitters and receivers of the upper and lower sections during installation. ■Equipped with sensitivity volume It is equipped with a sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance. ■Slim sensor head can be installed with one touch The sensor head adopts a one-touch installation type that can be installed simply by drilling a hole (Φ12mm) and pushing it in. Additionally, the diameter of the ring cover has been increased from the conventional 12mm to 15mm, improving workability.

  • Safety Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Infrared Beam Switch, Opposing Type, for 6m, Cold Climate Specification, DS-6NY

It can be easily installed with a super compact controller and a detachable connection cable.

■Realization of a compact controller This is a small controller with dimensions of W: 45mm H: 94mm D: 29mm, making it easy to install inside the door engine. ■Connection cables can be freely cut Depending on the installation conditions, both the light-emitting and light-receiving parts can have their connection cables freely cut. ●Cable length: 5m (for 6m DS-6N series, for 4m DS-4RN series) ●Cable length: 10m (for 10m DS-10N series) ■Slim sensor head can be installed with one touch The sensor head adopts a one-touch installation type that can be installed simply by pushing it into a pre-drilled hole (Φ12mm). Moreover, the diameter of the ring cover has been increased from the conventional 12mm to 15mm, improving workability. ■Equipped with sensitivity volume It features a sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance. ■User-friendly design ●High-reliability design that is hardly affected by external light disturbances such as sunlight ●Convenient operation indicator light for operation confirmation (Green LED: always on, turns off when detecting)

  • Safety Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Infrared Beam Switch Standard Specification for 10m DS-10TN

The controller unit has been miniaturized, and the wires can be cut freely. By adopting a scanning method, mutual interference between the upper and lower layers is prevented.

■Realization of compact controller Achieved miniaturization of the controller with dimensions W: 45mm H: 120mm D: 29mm. It can be installed in various locations within the door engine. ■Connection cables can be freely cut Depending on the installation conditions, both the light-emitting and light-receiving parts can have their connection cables freely cut, eliminating the need to bundle them inside the door engine as was done traditionally. ■Can be used as a single beam It can also be used as a single beam, allowing for initial installation as a single beam and the option to add a sensor head later to use it as a double beam if needed. ■Adoption of scanning method With the adoption of the scanning method, there is no mutual interference between the upper and lower sections. Therefore, it is not necessary to swap the light emitters and receivers of the upper and lower sections during installation. ■Equipped with sensitivity volume It is equipped with a sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance.

  • Safety Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Infrared Beam Switch Reflective Type Standard Specification for 4m DS-4RNY

It can be easily installed with a super compact controller and a detachable connection cable.

■Realization of a compact controller This is a small controller with dimensions of W: 45mm H: 94mm D: 29mm, making it easy to install inside the door engine. ■Connection cables can be freely cut Depending on the installation conditions, both the light-emitting and light-receiving parts can have their connection cables freely cut. ●Cable length: 5m (for 6m DS-6N series, for 4m DS-4RN series) ●Cable length: 10m (for 10m DS-10N series) ■Slim sensor head can be installed with one touch The sensor head adopts a one-touch installation type that can be installed simply by pushing it into a pre-drilled hole (Φ12mm). Furthermore, the diameter of the ring cover has been increased from the conventional 12mm to 15mm, improving workability. ■Equipped with sensitivity volume It is equipped with a sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance. ■User-friendly design ●High-reliability design that is hardly affected by external light disturbances such as sunlight ●Convenient operation indicator light for operation confirmation (Green LED: always on, turns off when detecting)

  • Safety Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Infrared Beam Switch for 4m Cold Climate Specification DS-4RTNY

The controller unit has been miniaturized, and the wires can be freely cut. By adopting a scanning method, mutual interference between the upper and lower tiers is prevented.

■Realization of compact controller Achieved a compact controller with dimensions W: 45mm H: 120mm D: 29mm. It can be installed in various locations within the door engine. ■Connection cables can be freely cut Depending on the installation conditions, both the emitting and receiving parts can have their connection cables freely cut, eliminating the need to bundle them inside the door engine as before. ■Can be used as a single beam It can also be used as a single beam, allowing for initial installation as a single beam and later expansion to a double beam by adding a sensor head if necessary. ■Adoption of scanning method By adopting a scanning method, there is no mutual interference between the upper and lower sections. Therefore, there is no need to interchange the emitters and receivers of the upper and lower sections during installation. ■Equipped with sensitivity volume It is equipped with a sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance. ■Thin sensor head can be installed with one touch The sensor head uses a one-touch installation type that can be installed simply by drilling a hole (Φ12mm) and pushing it in. Additionally, the diameter of the ring cover has been increased from the conventional 12mm to 15mm, improving workability.

  • Safety Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Research Material] Global Market for Ultrasonic Through-Beam Sensors

World Market for Ultrasonic Through-Beam Sensors: Resistive, Holzer, Others, Automotive, Power, Oil and Gas, Chemical, Agriculture, Construction, Others

This research report (Global Ultrasonic Through Beam Sensor Market) investigates and analyzes the current status and outlook for the global market of ultrasonic through beam sensors over the next five years. It includes information on the overview of the global ultrasonic through beam sensor market, trends of major companies (sales, selling prices, market share), market size by segment, market size by major regions, and distribution channel analysis. The segments by type in the ultrasonic through beam sensor market include resistive, Holzer type, and others, while the segments by application cover automotive, power, oil and gas, chemicals, agriculture, construction, and others. The regional segments are divided into North America, the United States, Europe, Asia-Pacific, Japan, China, India, South Korea, Southeast Asia, South America, the Middle East, and Africa, to calculate the market size of ultrasonic through beam sensors. The report also includes the market share of major companies in the ultrasonic through beam sensor market, product and business overviews, and sales performance.

  • Other services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Infrared Beam Switch, Opposing Type for 10m Cold Climate Specification, DS-10NY

It can be easily installed with a super compact controller and a detachable connection cable.

■Realization of compact controller This is a small controller with dimensions of W: 45mm H: 94mm D: 29mm, making it easy to install inside the door engine. ■Connection cables can be freely cut Depending on the installation conditions, both the light-emitting and light-receiving parts can have their connection cables freely cut. ●Cable length: 5m (for 6m DS-6N series, 4m DS-4RN series) ●Cable length: 10m (for 10m DS-10N series) ■Slim sensor head can be installed with one touch The sensor head adopts a one-touch installation type that can be installed simply by pushing it into a pre-drilled hole (Φ12mm). Additionally, the diameter of the ring cover has been increased from the conventional 12mm to 15mm, improving workability. ■Equipped with sensitivity volume It features a sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance. ■User-friendly design ●Highly reliable design that is hardly affected by external light interference such as sunlight ●Convenient operation indicator light for operation confirmation (Green LED: always on, turns off when detecting)

  • Safety Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Infrared Beam Switch for 10m Cold Region Specification DS-10TNY

The controller unit has been miniaturized, and the wires can be cut freely. By adopting a scanning method, mutual interference between the upper and lower levels is prevented.

■Realization of compact controller Achieved a compact controller with dimensions W: 45mm H: 120mm D: 29mm. It can be installed in various locations within the door engine. ■Connection cables can be freely cut Depending on the installation conditions, both the light-emitting and light-receiving parts can have their connection cables freely cut, eliminating the need to bundle them inside the door engine as before. ■Can be used as a single beam It can also be used as a single beam, allowing for initial installation as a single beam and, if necessary, the addition of sensor heads to use it as a double beam. ■Adoption of scanning method By adopting a scanning method, there is no mutual interference between the upper and lower sections. Therefore, it is not necessary to interchange the light emitters and receivers of the upper and lower sections during installation. ■Equipped with sensitivity volume It is equipped with a sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance. ■Thin sensor head can be installed with one touch The sensor head uses a one-touch installation type that can be installed simply by drilling a hole (Φ12mm) and pushing it in. Additionally, the diameter of the ring cover has been increased from the conventional 12mm to 15mm, improving workability.

  • Safety Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration